Site icon CYCHacks

Asphalt Driveways- A Better Way To Protect The Pavements

Asphalt Driveways

Roads or pavements are built once and after that, they are left to tolerate the harshness of the atmosphere and the heavy traffic running over it. Months later, one look at the pavement and you will realize that the road no longer looks exquisite and basks in the richness of the black colored glory of the bituminous rock.

A mixed variety of asphalt is used to make high-quality driveways. It consists of rock and sand with a certain thickness of 6% oil. Although in some cases concrete lasts longer, asphalt driveways are less expensive to install and maintain.

The rich and exquisite grayish-black color of the seal coat gives the pavement its glam look with sharply defined features. This rich texture of the asphalt seal coating is captivating many eyes.

With its increasing eminence amongst the people, this modified seal coating method is enhancing the beauty and magnificence when applied over the asphalt pavements.

After the new installation is made, you should be careful not to use the asphalt driveway for at least 3 to 5 days before it actually dries up. It is also mandatory not to go for the construction of the driveway during the monsoons.

What Does An Asphalt Seal Coat Is Made Of?

The rich black liquid mixture of the seal coat consists of the main asphalt ingredient such as asphalt emulsion, paving grade asphalt cement or cutbacks along with elastic polymers and rejuvenates.

Sometimes, to inflate the course texture of the protective coat, sand, mineral fillers or aggregate rubber crumbs is incorporated after the application of the black semi-liquid on the pavements.

Why Asphalt Driveways Are Better Nowadays?

The lately constructed asphalt pavement or driveway might look quite exotic and anew but the same feeling will not come after a few weeks. Exposed bitumen asphalt pathways are susceptible to weather changes as well as the natural degrading forces.

However, with the application of an additional protective coat of asphalt seal coat makes the pavements retain its originality and it is alluring and appealing appearance. When it comes to cost-effectiveness also, there are options that you get.

Asphalt is comparatively much cheaper than when you use concrete and the smooth finish of a concrete driveway is always no match to an asphalt driveway, as it requires much maintenance cost.

The reduced complexity of the application of asphalt seal coating and the easy availability of the constituents is proving to be a blessing for the asphalt sealers.

Moreover, asphalt rock or bitumen is readily available in nature, whereas the earlier preferred coal tar had to be obtained from the coal, the latter being economically unfeasible.

Thick Coating Of Asphalt:

The thick coating prevents the natural forces of corrosion like solar heat, water and even the oxygen of the atmosphere to come into contact with the base material of the pavement.

This slows down the surface oxidation and over time the coarse base particles do not react with the molecular oxygen and the water. The flexing and lustrous nature of the asphalt pavements are conserved, reducing the chances of it becoming brittle and vulnerable to erosion.

Asphalt Increases The Rate Of Surface Friction To A Large Extent:

Another advantage of the asphalt seal coat is the increased surface friction. When kept without any protection, the continuous base material corrosion results in the loss of the course texture of the pavements.

With the coat, the texture is made coarser and the anti-slippery properties of the asphalt coats help in increasing the frictional force against the tires of the vehicles.

You can contact asphalt driveways contractors who can create driveways that are appealing to your eyes.

Exit mobile version